Universal remote controls, infrared extenders, audio and video senders, X10 home automation, home security kits and accessories, surveillance cameras.
 | Marmitek PH7208U siren 110 dB | £48.00
incl VAT | | Wireless siren for use with alarms based on the Marmitek SC9000 control panel. Compatible with SafeGuard and TotalGuard wireless alarm systems. | | | |
|
|
|
|
|
 | Marmitek WK820 wireless keypad | £108.21
incl VAT | | One-way wireless keypad primarily designed as an additional arming station for the ProGuard 800 alarm system. | | | |
|
|
 | Marmitek SC9000U control panel | £75.00
incl VAT | | Alarm system control panel. Equipped with a built-in telephone dialler, 100 dB siren and X10 transceiver. Also available as part of the SafeGuard and TotalGuard wireless alarm systems. | | | |
|
|
|
 | Marmitek KR21E keyfob remote control | £20.00
incl VAT | | Wireless key fob remote control for use with alarm systems based on the Marmitek SC9000 control panel (e.g. SafeGuard and TotalGuard) and the Marmitek Homeguard alarm system. | | | |
|
|
 | Marmitek SH624 comfort remote control | £25.00
incl VAT | | Wireless remote control. Can be used to control alarm systems based on the Marmitek SC9000 control panel (e.g. SafeGuard and TotalGuard) and/or lights and other equipment via a Marmitek TM13U plug-in X10 transceiver. | | | |
|
|
|
|
 | Marmitek SD90 wireless smoke detector | £45.00
incl VAT | | Wireless smoke detector for use with alarm systems based on the Marmitek SC9000 control panel (e.g. SafeGuard and TotalGuard) and the Marmitek Homeguard alarm system. | | | |
|
|
|
|
|
|
|
|
 | Marmitek HomeGuard alarm system | £37.00
incl VAT | | Self-contained security system with built-in telephone dialer. Ideal for small apartments, garages and outbuildings. | | | |
|
|
|
|
|
|
|
 | Marmitek SD MemoryCam 2 set | £111.90
incl VAT | | The SD MemoryCam2 system includes one single channel digital event recorder and one wired outdoor colour camera. It will automatically have image capture or video recording once motion is detected by software, or manually by external alarm and will store it onto a standard SD card. | | | |
|
|
|
|
|
 | Marmitek DoorGuard 100 set | £109.99
incl VAT | | You fit the doorbell camera onto the door frame and connect the wires. As soon as somebody rings your bell, the image appears on the monitor inside. You can see who rang the bell and then decide to open the door or not. | | | |
|
|
 | Marmitek DoorGuard 300 set | £111.19
incl VAT | | You install the small doorbell camera onto the doorframe and connect the wires. As soon as a visitor rings your doorbell, the picture will get displayed on the home monitor. This way you see who is at the door before you open it (or pretend you're not at home). | | | |
|
|
 | Marmitek DoorGuard 400 set | £245.52
incl VAT | | You install the small doorbell camera onto the doorframe and connect the wires. As soon as a visitor rings your doorbell, the picture will get displayed on the home monitor. This way you see who is at the door before you open it (or pretend you're not at home). | | | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 | Marmitek FD10 phase coupler/ filter | £29.99
incl VAT | | Connects Marmitek X-10 signals over phases for the use of the Marmitek X-10 system in a multi phase installation. Filters Marmitek X-10 signals from the existing house wiring to prevent signals from coming in and leaving the building. | | | |
|
|
|
|
 | Marmitek AW12 X10 MicroModule | £33.01
incl VAT | | An extremely small Marmitek X-10 appliance module which can be fitted behind any installed switch or outlet. | | | |
|
|
|
|
|
 | Marmitek CM15Pro X10 PC interface | £50.37
incl VAT | | With extras like extended codes, conditional macros and a built in transceiver, the Marmitek CM15Pro offers the functionality of a computer interface and a transceiver in one. | | | |
|
|
|
|
|
|
|
|
 | Marmitek IR/RF7243 X10 controller/transceiver | £21.15
incl VAT | | Control console for controlling X10 modules either directly by pressing the buttons on the console itself, or indirectly by using a compatible infrared (IR) or radio frequency (RF) remote control. | | | |
|
|
 | Marmitek SM10 Universal X10 sender | £37.00
incl VAT | | Sender for controlling appliances and lights, that are plugged into the Marmitek X-10 modules, through the existing house wiring. | | | |
|
|
 | Marmitek XM10 X10 TTL/CMOS Interface | £29.99
incl VAT | | Two-way TTL/CMOS interface for connecting the Marmitek X-10 system with your own applications or with appliances which have a X-10 interface entry (alarm systems, thermostats, touch screen controllers, etc). | | | |
|
|
 | Marmitek TM13 plug-in X10 transceiver | £19.00
incl VAT | | Takes radio frequency commands from Marmitek wireless controllers (remote controls, wireless switches and wireless sensors) and converts them to the X-10 signals carried over existing house wiring. The TM13 also has a built-in appliance module. | | | |
|
|
|
|
|
 | Marmitek LM12W X10 lamp module with wire | £19.99
incl VAT | | Flying lead connection block with dim function. This module has the same technical specifications as the LM12 lamp module, but the LM12W is equipped with flying leads. | | | |
|
|
|
 | Marmitek AM12W X10 appliance module with wire | £21.00
incl VAT | | Flying lead connection block with switch function. This module has the same technical specifications as the AM12 plug-in appliance/switch module, but the AM12W is equipped with flying leads. | | | |
|
|
|
|
|
|
|
 | Marmitek StereoControl infrared extender set | £15.00
incl VAT | | Use your existing infrared remote controls to control up to two audio-visual devices which are located behind closed cabinet doors or in other concealed locations. | | | |
|
|
|
|
|
 | Marmitek ControlAnywhere remote control receiver | £15.00
incl VAT | | Suitable to control appliances that are out of sight, at a great distance or even in other rooms in the home. Works in combination with Marmitek remote controls with a RF (radio frequency) transmitter. | | | |
|
|
 | Marmitek IR eye infrared extender cable | £7.50
incl VAT | | Use the IR eye when you want to control an additional two appliances in a closed cupboard with the Invisible Control, PowerMid or IR Control Pro 8 systems. | | | |
|
|
 | Marmitek PowerMid XL transmitter | £14.50
incl VAT | | With an extra transmitter for your Marmitek PowerMid XL infrared extender set you can control your TV, VCR, satellite receiver or audio installation from a second room in your house using your existing remote controls. | | | |
|
|
 | Marmitek PowerMid XL receiver | £14.50
incl VAT | | Extra receiver for the PowerMid XL infrared extender set. With an extra receiver you can control equipment throughout your house from one location. | | | |
|
|
|
|
|
|
|
 | Marmitek GigaVideo 45 transmitter | £24.01
incl VAT | | Extra transmitter for your GigaVideo 45 system. You can use an extra transmitter to send signals from different places in your house to the receiver, which is situated by your (second) TV set. | | | |
|
|
 | Marmitek GigaVideo 45 receiver | £24.01
incl VAT | | Extra receiver for the GigaVideo 45 system. With each extra receiver you can receive the signal from your transmitter(s) at one more place in your house. | | | |
|
|
 | Marmitek GigaVideo 70 transmitter | £24.40
incl VAT | | Extra transmitter for your GigaVideo 70 system. You can use an extra transmitter to send signals from different places in your house to the receiver, which is situated by your (second) TV set. | | | |
|
|
 | Marmitek GigaVideo 70 receiver | £25.40
incl VAT | | Extra receiver for the GigaVideo 70 system. With an extra receiver you can receive the signal of the sender at more places in your house. | | | |
|
|
 | Marmitek SmartScartBox | £15.00
incl VAT | | If you want to transmit the signal of more than one video source (DVD, VCR, satellite, etc.) with your GigaVideo 70, then the SmartSc |
|
|
View basket | Checkout
