Easy-to-use alarm system with built-in PIR motion sensor. Ideal for small apartments, garages and outbuildings.
Built-in phone dialler: Calls up three numbers automatically when alarm is triggered.
Built-in 90 dB siren.
Mains powered (with battery backup).
Remote control included (Marmitek KR21)
Up to 4 remote controls can be used with each base unit.
The same remote control can be registered with several base units.
What's in the box?
1 x HomeGuard base station
1 x power adapter
1 x telephone cable
1 x cable for external sensor
1 x 9 volt battery (for backup)
1 x manual
Technical data
BASE UNIT
Range (PIR):
100 deg - 6m (PIR can be switched off)
Alarm:
95 dB (can be switched off)
Power:
230VAC, 12VDC adapter included. 9V emergency battery (maximum 8 hours when using alkaline battery)
Phone dialler:
Maximum 3 telephone numbers (each maximum of 16 digits) Pause option for PABX/alarm system Phone dialer stops after confirmation of receipt Built-in voice chip with standard message
External connection:
Connection for potential-free normally-open (NO) or normally-closed (NC) contact (e.g. magnetic sensor)
Dimensions:
130 x 75 x 60 mm (H x W x D)
REMOTE CONTROL (KR21)
Frequency:
433.92 MHz (works through walls and floors)
Functions:
1. Alarm on (with delay) 2. Alarm off 3. Panic (direct alarm)