|
Opus WCU310-ST stainless steel wall control unit
|
|
The WCU300-ST is the wall control unit for the Opus 300 multi-room entertainment system and can be used as both main or sub-zone controllers. Working on the A-BUS standard, installation is extremely simple with just one Cat5 cable connection needed from WCU300-ST keypad to MCU300 and standard speaker cable from the keypad to loudspeakers. Remarkably, amplification for the speakers is built into the back of the WCU300-ST and a pre-amp output is even provided for driving external amplifiers or a powered subwoofer.The WCU300-ST may also be used with other A-BUS ready audio set-ups by flicking the rear-mounted switch to standard (A-BUS ), for access to all basic functions.
|
 |
|
|
 |
Full control of volume, bass, treble, balance, fader, input change. |
|
Fully A-BUS compatible. |
|
Powered by Cat5 UTP interconnect cable from the master control unit (no external power supply needed). |
|
Built-in pre-amp output for powering external amplifiers or a powered subwoofer if required. |
|
Direct connection to ceilingmounted or other speakers. |
|
Uses standard Easy-clip faceplates (full range of styles and finishes available from MK and other suppliers). |
|
Fits standard UK 47mm back box. |
|
| Dynamic Power Output: |
15 Watts rms, 4 Ohms |
| Frequency Response: |
20Hz - 20kHz |
| Volume Control Range: |
-80dB 32 steps |
| Bass Control Range: |
+/- 16dB 2dB steps |
| Treble Control Range: |
+/- 16dB 2dB steps |
| Balance Control Range: |
+/- 40dB 9 steps both ways |
| IR Pass-through: |
34 - 40kHz and 54 - 58kHz modulation |
| Power: |
powered from MSH via Cat5 or Cat6 cable |
| Size (w x h): |
84mm x 84mm - fits standard 47mm back box |
|
