Marmitek IR Control8 remote control extender set

Locate your A/V equipment in a closed cupboard, TV cabinet or even in another room. The IR receiver must be installed in view of your own remote control. This new, updated IR receiver can even be placed in the vicinity of your Flat Screen (Plasma, LCD or LED screen). Stick the IR LEDs onto the front panel of your A/V equipment and place the IR main module out of sight. Point the remote control at the IR receiver in order to send the appropriate command to the IR LEDs (via the IR main module). These will then immediately pass this onto the A/V equipment.

• Relays infrared remote control signals to audio-visual equipment by means of two detachable infrared extender cables.
• Can control four devices in a closed cupboard (or otherwise out of sight).
• Can control up to four further audio-visual devices when used in conjunction with additional infrared extender cables.
• Equipment can be controlled from up to three different locations by adding Marmitek 3856S surface mount infrared receivers or Marmitek 3856P panel mount infrared receivers.
• Equipment can be controlled from up to 300 metres away by extending the infrared receiver cable.
• Mains powered (mains adapter included).
• Compatible with most brands of audio-visual equipment including Sky, Sky+ & Sky HD.

• 1 x IR module
• 1 x IR receiver
• 2 x IR extender cable with 2 IR LEDs each (blinking)
• 1 x Power adapter
• 1 x Instruction manual

Dimensions:	IR module: 85 x 49 x 24 mm (including fastening points) IR receiver: 47 x 10 x 14 mm
Colour:	Black
Power:	230VAC/50Hz 12VDC 500mA
IR extender cable length:	3 metres (approx 2 metres from plug to division, 1 metre from division to LEDs)
IR extender cable connection:	3.5mm jack plug
IR receiver cable length:	2 metres, extendable to max 300 metres (UTP or equivalent)

• Download a brochure for the Marmitek IR Control8 infrared extender set.
• Download an instruction manual for the Marmitek IR Control8 infrared extender set.