Features
- Controllable from a distance with X10 'on' or 'off' commands
- Remote and local control ('on' or 'off')
- Can be used with low energy lamps
- Because of its extremely small proportions, the module can be built in behind wall switches and wall outlets (minimal backbox depth 40mm, advice 50mm). The module is also ideally suited to build in light armatures and for installation in small spaces in for instance lowered ceilings.
- Multi-purpose: fully free choice in brand, colour and model switch material. With the built-in dimmer you can switch and dim 230V light bulbs, 230V halogen lighting and low voltage halogen lighting with electronic transformer suitable for phaseingate up to 120 Watt.
- The module can be controlled by Momentary switches connected to the module or at a distance, making use of the Marmitek X-10 (plc) signal through the power line.
- In case of a voltage cut-off, the module will save the reading prior to the cut-off. (dim level/off).
Functions
- Local control via the switch attached to the module or remote control using Marmitek X-10.
- Built-in dimmer, 120W.
- Two-way X-10: transmits the set dimmer level to other LWM1, LD11, LW12 and LW11 modules (set to the same HouseCode and UnitCode).
- Softstart and softdim.
- Memory function for last dimmer setting.
- Responds to ON, OFF, DIM, BRIGHT and extended X-10 (dimmer setting originates from other LWM1 modules).
What's in the box?
- 1 x LWM1 X10 lamp micromodule
- 1 x installation guide
Technical data
| Power: | 230V - 50Hz |
| Capacity: | 250W/230V with temperature and mounting restrictions. 120W/230V light bulbs. 100W Low voltage halogen lighting with wound voltage transformer. 120W Low voltage halogen lighting with electronic voltage transformer(recommended voltage transformer: Osram HTM series. If you use other voltage transformers, we advise you to test the combination before building in the system). Softstart/Softdim. Memory reading for dim level. |
| X10 Key codes: | All units Off, All Lights On, On, Off, Dim, Bright, Extended Code 1 type 3, Pre-Set Dim, Status Request. |
| X10 transmisson: | 1 pulse on 0° and 180° |
| Switch use: | 1 or 2 way momentary switch |
| Connection reach: | Till 2.5 mm2 |
| Fuse: | Radial lead micro fuse, 1.6AT, 250V. |
| Environment temperature: | -10°C to +35°C (operation) -20°C to +70°C (storage). |
| Dimensions: | 46 x 46 x 16 mm |
Downloads
Information & advice
