Marmitek MegaView20 audio/video sender

Allows a video and audio signal from an AV device without an RF (co-ax) output to be sent over an existing TV aerial distribution system and be received as an extra TV channel.

Manufacturer part number: 09836

Availability:  This item is normally dispatched within 5 working days.

Our price: £27.60 (including VAT)

Marmitek MegaView20 audio/video sender

Double click on image to enlarge or use controls below:

Zoom Out
Zoom In
Overview

The MegaView20 is a programmable modulator which converts audio and video signals of your DVD-player, satellite receiver, VCR, surveillance camera, decoder, set top box or PC and adds them as an extra TV channel on your TV aerial cable. Then you can watch this signal as a kind of internal TV-channel wherever there is a TV aerial connection in your home.

Features
  • Create an extra TV-channel on the existing antenna network in your home and watch your DVD recorder, decoder, satellite receiver and so on in every room with an antenna connection.
  • You do not need a second DVD-recorder or set top box in your bedroom.
  • Maintain good image and sound quality.
  • Easy to connect.
What's in the box?
  • 1 x MegaView20 modulator
  • 2 x Power adapter
  • 1 x IEC Antenna cable (1 metre)
  • 1 x Instruction manual
Technical data
Power: 230VAC/50Hz, DC 9V/200mA
Standard: PAL B/G
Modulation frequency range: UHF: 471.25~855.25MHz channel 21-69
Input: Video, Audio L+R (SCART, RCA)
Output level: 75 dBìV +/- 5dB in 75 Ohm
Insertion loss: < 1,5dB at 860MHz
Carrier wave audio: 5.5MHz
Modulation method: Double side band modulation
Dimensions: 120 x 84 x 33mm
Schematic
Marmitek MegaView20 audio/video sender schematic
Downloads