Overview
The MegaView20 is a programmable modulator which converts audio and video signals of your DVD-player, satellite receiver, VCR, surveillance camera, decoder, set top box or PC and adds them as an extra TV channel on your TV aerial cable. Then you can watch this signal as a kind of internal TV-channel wherever there is a TV aerial connection in your home. Thanks to the built-in “infrared return channel” you can continue to operate the connected appliances from other rooms using your own remote control.
Features
- Create an extra TV-channel on the existing antenna network in your home and watch your DVD recorder, decoder, satellite receiver and so on in every room with an antenna connection.
- You can operate the connected A/V device from the room where you are watching TV.
- Free of interference because of the solid metal housing.
- You can also connect multiple IR receivers (for operating from multiple rooms).
What's in the box?
- 1 x MegaView70 stereo modulator
- 1 x Infrared receiver
- 2 x Power adapter
- 1 x IR extender cable with 1 LED
- 1 x RCA-RCA cable
- 1 x Scart adapter
- 3 x Adapter F-connector to IEC-connector male
- 2 x Adapter F-connector to IEC-connector female
- 1 x User manual
Technical data
| Stereo RF Modulator | |
| Power: | 230VAC/50Hz, DC 12V/400mA |
| Standard: | PAL B/G/I |
| Modulation frequency range: | VHF2: 170 ~ 230MHz (Channel 5-12) UHF: 470 ~ 860MHz (Video, Audio L+R Channel 21-69) |
| Input: | SCART |
| Selectable output level: | 80 ~ 95 dBµV +/- 3dB in 75 Ohm |
| Coupling loss: | <1.5dB at 860Mhz |
| Carrier wave Audio: | 4.5 . 6.5MHz |
| Modulation method: | Double sideband modulation |
| Dimensions: | 96 x 82 x 34mm |
IR Receiver |
|
| Power: | 230VAC/50Hz, DC 12V/400mA |
| Centre frequency: | 10.7MHz |
| Infrared: | ≤40KHz |
| Coupling loss: | < 1.5dB max |
| Dimensions: | 53 x 49 x 18mm |
Schematic
Downloads
