Features
- Micromodule with built-in relay with two contacts for connecting a 230V motor.
- Can be controlled remotely with every X-10 signal (also simultaneously multiple modules). Of course local operation also remains possible.
- Invisible installation behind existing switches or wall outlets.
- Brand and model of the switch can be chosen freely so the SWM1P can be used in every interior and installation.
- Equipped with a preset function; a position for rolling down shutters (for instance a day-/ventilation position) which can be pre-set.
- Local blocking position for blocking the motor during for instance cleaning of the windows or maintenance.
- Lowers, in combination with the CM15Pro™ computer interface, the sun blinds automatically during the day in places where the sun shines inside. This way you protect your furniture against the sunlight, keep the house cool and simulate that you are at home.
- Quick and easy to install and to program.
Functions
- Sunblind module (micromodule) for installation behind a momentary switch or in a junction box.
- Driving of one 230Vac motor with at most 2.5 A.
- Reacts to ON, OFF, DIM+, DIM- and extended sunblind commands.
- One free programmable address A1…P16 for operation.
- One free programmable address A1…P16 for the Preset mode.
- Preset function for programming of a preference position.
- Possibility for controlling multiple SWM1P modules at once to one preference position using the Preset function.
- Local lock function for inhibiting the operation of the motor, for instance during maintenance.
What's in the box?
- 1 x SWM1P X10 sunblind/shutter switch micromodule
- 1 x installation guide
Technical data
| Power: | 230 V AC+/- 10%, 50 Hz |
| Switching capacity: | 500W/230 VAC with temperature and mounting restrictions. |
| Protection: | Continuous driving time maximum 4 minutes. Output temperature protected. |
| Use: | < 1 W |
| Fuse: | Radial lead micro fuse, 4 AT. |
| Power consumption: | < 30 mA capacitive |
| Signal transmission: | > 5 Vpp in 5 ohm at 120 kHz |
| X-10 transmission: | 1 pulse at 0° and 180° |
| Signal sensitivity: | 5 mVpp...6 Vpp at 120 kHz ± 4 kHz |
| Signal to noise ratio: | 1.35 : 1 |
| X-10 Key codes transmitting: | ON, OFF, extended |
| X-10 Key codes receiving: | ON, OFF, DIM+, DIM-, extended, Status Request |
| Connection range: | Up to 2.5 mm2, tightening moment 0.5 Nm |
| Ambient temperature: | 0 °C to 40 °C |
| Relative humidity (non condensing): | 30 to 90% |
| Dimensions: | 46 x 46 x 16 mm |
Downloads
Information & advice
