Marmitek TWM4 X10 transmitter micro module

X10 micromodule transmitter/receiver for switching electrical appliances and lights.

Manufacturer part number: 09794

Availability:  This item is normally dispatched within 5 working days.

Our price: £58.74 (including VAT)

Marmitek TWM4 X10 transmitter micro module

Overview

Suitable for controlling various Marmitek modules (actuators) through X-10 commands. The TWM4 can also be used behind a (rocker) switch or Momentary switch to start programming macros in, for example, a Marmitek CM15Pro Computer Interface.

Functions
  • Can send ON, OFF, DIM, BRIGHT, All Lights On, All Units Off or All Lights Off commands (depending on the programming).
  • Adjustable for fixed mode or toggle mode sending of ON/OFF commands.
  • The dimmer interface is adjustable for use with Momentary switches with one or two, normally open contacts (optionally with zero position, multi-switch).
  • Adjustable for automatic request for status information (two-way communication, status request).
  • Adjustable for receipt of group commands for a status update in toggle mode.
Connection applications

Suitable for the connection of:

  • Four 1-pole (rocker) switches.
  • Four 1-pole, normally open contact, Momentary switches.
  • Two Momentary switches with two normally open contacts (optionally with zero position, multi-switch).
  • One Momentary switch with four normally open contacts (optionally with zero position, multi-switch).
  • Four random potential-free contacts with a common contact (P contact).
What's in the box?
  • 1 x Marmitek TWM4 X10 transmitter micro module
  • 1 x installation guide
Technical data
Rated voltage: 230 VAC +/- 10% , 50 Hz
Current consumption: < 30 mA capacitive
Signal transmission: > 5 Vpp in 5 Ω at 120 kHz
Transmission synchronization: 1 pulse burst at 0°/180°
Signal sensitivity: 25 mVpp...6 Vpp at 120 kHz ± 4 kHz
Signal/noise ratio: 1.35:1
X-10 Key codes transmitting: ON, OFF, BRIGHT, DIM, All Lights ON, All Lights OFF, All Units OFF, extended
X10 Key codes receiving: ON, OFF, BRIGHT, DIM, extended, Status Request
Connection range: Up to 2.5 mm2, tightening torque 0.5 Nm
Ambient temperature: 0 °C to 35 °C
Relative humidity: 30 to 90% (non-condensing)
Dimensions: 46 x 46 x 16 mm
Minimal back box depth: 40mm, recommend 50mm
Downloads
Information & advice

Automating & controlling electrical equipment using X10