The UM7206 provides the link between low-voltage appliances and the Marmitek X-10 system. The UM7206 module receives the X-10 signal via the lighting circuit and switches lights and 24 V DC appliances with a current up to 5 A. The UM7206 can be set to pulse or continuous contact and can be controlled remotely with the Marmitek X-10 commands “ON” and “OFF”. The UM7206 is manually operated via two keys: “ON” (on/test) and “OFF”. The UM7206 also has a built-in buzzer that produces a sound when the module receives an “ON” signal. The buzzer can, if preferred be deactivated. If the unit is set to pulse switching with sound, the built-in buzzer will produce three to four high-pitched bleeps. The module is powered and controlled via the 230V lighting circuit and is fitted with a mains power lead.
- Universal switch module.
- Transforms a Marmitek X-10 signal into a switch contact.
- Control your own low-voltage applications.
- Controllable from a distance with the Marmitek X-10 commands On/Off.
- Built-in buzzer can be switched off.
- Can be installed for pulse or continuous contact.
- Switches 24V DC with power up to 5A.
- Controllable by hand with pushbuttons on the module itself.
- 1 x UM7206U X10 universal receiver
- 1 x installation guide
| Power supply: | 230VAC 50 Hz |
| Power consumption: | < 20 mA capacitive |
| Switching power: | 5A at 24 VDC |
| Signal sensitivity: | 15 mVpp min., 50mVpp max. at 120 kHz |
| Input impedance: | > 55 Ohm (P-N) at 120 kHz |
| Responds to X-10 Key codes: | On, Off. |
| Connectors: | 2 x screw connector |
| Ambient temperature: | -10°C to +50°C (operation) -20°C to +70°C (storage) |
| Dimensions: | 55 x 90 x 38 mm |
