The Local Input Module 300 (LIM300) is a neat in-wall unit that enables connection of an additional local source to those distributed by the MCU300. This allows devices such as PlayStations™ or iPods™ to be used in the room or corresponding sub zone where the LIM300 is fitted. LIMs can be installed in one or more zones and connect between the MCU audio hub and a WCU300 / AMR650 amplified control module using Cat5 wiring.
Each local source can be intuitively controlled through the Opus 300 remote and/or keypad / active speaker. The LIM300 features an interchangeable ‘Easy clip’ surround enabling customisation to suit any room.
Features
- Used to add local source equipment.
- Can add two LIM300 per zone/sub-zone (local 1 and local 2).
- Uses standard Easy-clip faceplates (full range of styles and finishes available from MK and others).
- IR output for routed IR control from zone keypad.
- Fits standard UK 47mm back box.
- 1 x LIM300 local input module
- 1 x Installation guide
What's in the box?
Technical data
| Max line level inputs: | 2.2 V rms |
| Cat-5 connections: | Krone punchdown |
| Dimensions: | 50 x 50 x 45mm |
| Weight: | >100g |
| Maximum cable length: | 30M/100ft |
| IR (Infra red output): | Modulated 34-40 kHz and 55-59 kHz supported |
| Power requirement: | 24V DC @ 20mA max (supplied by hub) |
Schematic
More information
