Designed to work with the Opus MCU300 multi-source hubs, the Opus VSU300 video switching unit adds full audiovisual switching capability to the Opus 300 multi-room entertainment system.
The 6 composite video inputs correspond to the audio inputs on the attached MCU, and can be distributed to the 4 main zones plus 4 sub-zones around the house.
When an audio source is selected in any zone via a WCU300 wall-mounted control panel, the VSU300 V2 automatically routes the corresponding video signal to the same zone.
Loop outputs for all 6 video sources are provided, enabling integration with an existing hi-fi or home theatre system.
Features
- 6 composite video source inputs.
- Feeds up to 4 main zones plus 4 sub–zones.
- Ext/CCTV source input.
- Powered by attached MCU300, no extra power supply needed.
- Loop outputs for all video source inputs.
- Automatic switching to match audio source selection.
- Improved video bandwidth for better quality picture.
What's in the box?
- 1 x VSU300 video switching control unit
- 1 x Instruction manual
Technical data
| Source Inputs: | 7 (6 + Ext/CCTV) Type 75 Ohm, composite video CCTV input IR code RC5 Sys 19. Command 9 |
| Video Bandwidth: | 20MHz |
| Maximum cable run to zone: | 50 metres/150 feet |
| Recommended cable type to zone: | RG6/CT100 75 Ohm co-axial | Power: | Provided by MCU300 (not included) |
| Size (W x H x D) | 165 x 48 x 74 mm approx. |
| Weight: | 0.59kg |
Schematic
More information
