Features
- Set up your own ‘professional’ infrared extender system and make it suitable for almost every situation.
- Operate any of your A/V equipment which is located behind closed cupboard doors (or even from another room) with your current remote control.
- Wide range of diverse IR receivers, suitable for every situation.
- With IR blaster option for operating numerous devices with one IR blaster or if you prefer not to stick IR LEDs onto your A/V equipment.
- With the exception of the IR receiver, all components can be placed completely out of sight.
- Suitable for both professional and home use.
Schematic
System components and relevant technical data
| Dual-band IR Receivers (Surface mount or panel mount) New, interference-suppressing technology for use in the vicinity of Flat Screens (such as Plasma, LCD and LED screens), indirect sunlight and energy-saving bulbs. |
| Frequency range: 30 - 60 kHz |
| IR reception range: +/- 10 meters |
| Length of cable: 2 meters, extendable to 300 meters |
| LED display: IR reception (RED), Status (Blue) |
| IR reception angle: 90° (+45°/-45° from centre) |
Broadband IR Receivers (Surface mount, panel mount or table top) Suitable for almost every brand and model of A/V equipment. |
| Frequency range: 30 - 100 kHz |
| IR reception range: +/- 10 meters |
| Length of cable: 2 meters, extendable to 300 meters |
| LED display: IR reception (RED), Status (Blue) |
| IR reception angle: 90° (+45°/-45° from centre) |
IR System Module 200 |
| Supply Power: 100-240VAC 50/60Hz, 12VDC 1.2A |
| Power STATUS: 12VDC 200mA. plug, - 5.5mm outside + 2.1mm inside (not supplied) |
| IR LED connection: 2x 3.5mm mini jack plug (mono) |
| IR LED/Blaster connection: 2x 3.5mm mini jack plug (mono) |
| IR Receiver connection: 1 connector for a maximum of 3 parallel connected IR Receivers. |
| Dimensions: 79 x 52 x 26mm |
IR LEDs (blinking or non-blinking) The blinking LED version lights up if you send an infrared command with the remote control. The non-blinking LED just passes the command onto the device but does not light up. |
| Connection: 3.5mm jack plug (mono) |
| IR LEDs: 1 or 2 IR LEDs per cable |
| Length of cable: 3 meters (plug to divison 2m, divison to LED 1m) |
IR Blaster An IR Blaster emits a lot more infrared light (up to a distance of two metres) and can, therefore, operate numerous devices. |
| Connection: 3.5mm jack plug (mono) |
| IR LEDs: 1x IR blaster LED |
| Length of cable: 3 meters |
| IR transmitting range: 2 meters, sensor in line of sight |
Downloads
Information & advice
Controlling audio-visual equipment in a cupboard or in a different room
Keep up to date
Recently Viewed Products
Related Products
Information & Advice
