Features
- Because of its extremely small proportions the module can be built in behind built in switches and wall outlets (minimal depth flush switch with box 40mm, preferred: 50mm).
- The module is also ideal for building in light armatures and for installing in small spaces with for instance lowered ceilings.
- Multi-purpose: fully free choice, colour and model of switch material.
- To this module two switches can be connected. One controls the internal appliance module, but also controls the matching X-10 command through the power line. With the second switch ON/OFF commands can be sent for a second X-10 address.
- The address to be set up can be programmed through the power line with every Marmitek X-10 remote control (e.g. Marmitek EasyControl8™ remote control with TM13 transceiver).
- The AWM2P can react to one or more group commands (ALL LIGHTS ON, ALL UNITS OFF). These functions are disabled by default.
- The AWM2P supports two way Marmitek X-10 communication.
- Both normal switches (on-off) and Momentary switches can be connected to the module. These are automatically recognized by the AWM2P.
- This module is suitable for installing two-way switches without wiring between the switches (MicroModules pass on their status to other MicroModules).
- The AWM2P can control Macro’s/Scenario’s by operating a conventional switch (with for instance Marmitek ActiveHomePro).
- The internal appliance module remembers its status after a main voltage cut-off.
What's in the box?
- 1 x AWM2P X10 appliance micromodule
- 1 x installation guide
Technical data
| Power: | 230V - 50 Hz |
| Electricity consumption: | < 30 mA capacitive |
| Switching power: | 3600W 230V with temperature and mounting restrictions. 2300W/230V 500W ind cap |
| Signal transmission: | > 5Vpp in 5 Ohm at 120 kHz ± 1kHz |
| X-10 transmission: | 1 pulse burst on 0˚ and 180˚ |
| Signal sensitivity: | 25mVpp … 6 Vpp at 120 kHz ± 4kHz |
| X-10 Key codes: | All units Off, All Lights On, On, Off, Status Request. |
| Switch use: | normal switches (make/break) or Momentary switches |
| Connection range: | Up to 2,5 mm2 |
| Environment temperature: | -10°C to +35°C (operation) -20°C to +70°C (storage). |
| Dimensions: | 46 x 46 x 16 mm |
Downloads
Information & advice
