It is possible that Marmitek X-10 signals are attenuated by devices and lights which are connected to the power line. In a normal home situation this effect is negligible (the Marmitek X-10 system is using active gain control to eliminate the effects). However, it is possible that a particular device in your house is attenuating the signals so much that the range of Marmitek X-10 signals is decreased significantly. When you have range problems, it is wise to try to locate the device which is attenuating the signals simply by unplugging devices from the power line, and testing the differences in range for your Marmitek system. When e.g. your conclusion is that e.g. your computer monitor is attenuating the signal, you can use a FM10 Plug-in Filter between the power line and the monitor to eliminate the effects.
- 1 x FM10 plug-in X10 filter
- 1 x installation guide
| Power supply: | 230 VAC, 50 Hz |
| Maximum load: | 3600 Watts |
| Damping at 120kHz: | 14dB |
| Input impedance: | 7 Ohm (P-N) at 120 kHz |
| Ambient temperature: | –10°C to +40°C (operation) -20°C to +70°C (storage) |
| Dimensions: | 52 x 122 x 33 mm |
